leiyun
/
ute2e
1
0
Förgrening 0
Kod Ärenden 0 Pull-förfrågningar 0 Släpp 0 Wiki Aktiviteter
Du kan inte välja fler än 25 ämnen Ämnen måste starta med en bokstav eller siffra, kan innehålla bindestreck ('-') och vara max 35 tecken långa.
37 Incheckningar
1 Gren
3.9 GiB
 
 
 
 
Träd: fd4102bfbb
Grenar Taggar
${ item.name }
Skapa branchen ${ searchTerm }
från 'fd4102bfbb'
${ noResults }
ute2e/reports/bridge-narration-junhao-202.../video-manifest.json

447 rader
25 KiB
Rå Blame Historik 

  1. {

  2.   "profile": {

  3.     "revision": "junhao-v2-20260921",

  4.     "agent": "测试虚拟教员",

  5.     "agentSlug": "dh-ffcaecf8b65d",

  6.     "agentDataVersion": 19,

  7.     "avatarName": "教员1",

  8.     "providerAvatarId": "a1000000000000000000000000000005",

  9.     "voice": "MOSS · Junhao",

  10.     "voiceCapabilityId": "builtin-voice-moss-junhao",

  11.     "engine": "MOSS-TTS-Nano",

  12.     "speaker": "Junhao",

  13.     "speed": 1.0,

  14.     "materialVersion": "v2",

  15.     "width": 480,

  16.     "height": 640,

  17.     "fps": 25,

  18.     "lipAndPlaybackInput": "same mono 16kHz PCM16 WAV",

  19.     "pauseProcessing": "silence below -48dB longer than 0.65s shortened to 0.32s",

  20.     "avatarManifestSha256": "8155a21af68b60ea024c7591c8ad454aa9884a2c7d22cb069c16bb192bc4e122"

  21.   },

  22.   "scripts": [

  23.     {

  24.       "id": "bridge-pump-switch",

  25.       "version": "2",

  26.       "code": "TASK-VIRTUAL-005",

  27.       "title": "重型支援桥液压泵应急切换",

  28.       "steps": [

  29.         {

  30.           "stepCode": "front-pump-step-01",

  31.           "number": 1,

  32.           "expectedTitle": "根据故障现象确定是哪一个液压泵发生故障",

  33.           "expectedInstruction": "根据故障现象确定是哪一个液压泵发生故障（注:模型_1液压泵标记出来。例如显红色）",

  34.           "text": "第一步，根据故障现象，确认是哪一个液压泵发生故障。",

  35.           "url": "/legacy/virtual-training/narration-revisions/junhao-v2-20260921/TASK-VIRTUAL-005-step-01.mp4",

  36.           "duration": 5.88,

  37.           "sha256": "1f1c9d88b4840a9d829fde376b2f84d32a40d44501fffffcacfd4f28f9f14694"

  38.         },

  39.         {

  40.           "stepCode": "front-pump-step-02",

  41.           "number": 2,

  42.           "expectedTitle": "断开架桥车取力器",

  43.           "expectedInstruction": "断开架桥车取力器。（注：显示模型2取力器和2取力器开关，摇动模型2取力器开关。特别说明这个这边是早上随手补的不准确，车外看就行，不要拉近）",

  44.           "text": "第2步，断开架桥车取力器。将架桥车取力器断开。",

  45.           "url": "/legacy/virtual-training/narration-revisions/junhao-v2-20260921/TASK-VIRTUAL-005-step-02.mp4",

  46.           "duration": 4.72,

  47.           "sha256": "048eea17d6b0486994eb8cadb84ea4e1b240c0fbaefa9ee1767f9be7fa9d5bdd"

  48.         },

  49.         {

  50.           "stepCode": "front-pump-step-03",

  51.           "number": 3,

  52.           "expectedTitle": "将架桥车备胎斜上方链接两个红色滤油器的球阀打开",

  53.           "expectedInstruction": "将架桥车备胎斜上方链接两个红色滤油器的球阀打开。（注；把模型3球阀开关由垂直与官道方向旋转至平行于管道方向）",

  54.           "text": "第3步，打开互救球阀。打开备胎上方两个红色滤油器之间的连通球阀，手柄由垂直管道转为平行管道。",

  55.           "url": "/legacy/virtual-training/narration-revisions/junhao-v2-20260921/TASK-VIRTUAL-005-step-03.mp4",

  56.           "duration": 9.52,

  57.           "sha256": "3ce0a02818a4fe79a48d8243b0902805e2226d6eb4bf5f09cdd8a859c00191e2"

  58.         },

  59.         {

  60.           "stepCode": "front-pump-step-04",

  61.           "number": 4,

  62.           "expectedTitle": "重新联通取力器",

  63.           "expectedInstruction": "重新联通取力器（注：把步骤2的2取力器开关摇回去：还是不要拉近）",

  64.           "text": "第4步，重新接通取力器。将架桥车取力器重新接通。",

  65.           "url": "/legacy/virtual-training/narration-revisions/junhao-v2-20260921/TASK-VIRTUAL-005-step-04.mp4",

  66.           "duration": 5.12,

  67.           "sha256": "bce9bfd1d0a96d38978f29159f0a4e565516dd2ae3deb80eb6cde84780e435cf"

  68.         },

  69.         {

  70.           "stepCode": "front-pump-step-05",

  71.           "number": 5,

  72.           "expectedTitle": "打开辅助控制盒内的“互救”开关",

  73.           "expectedInstruction": "打开辅助控制盒内的“互救”开关（注：打开5辅助控制盒盖在5辅助控制盒面板上，把5互救开关往上搬）",

  74.           "text": "第5步，打开辅助控制盒互救开关。打开辅助控制盒盖，再打开互救开关，进入单泵作业状态。",

  75.           "url": "/legacy/virtual-training/narration-revisions/junhao-v2-20260921/TASK-VIRTUAL-005-step-05.mp4",

  76.           "duration": 8.08,

  77.           "sha256": "22df33fbc0b4c14c50328ddc361f71ca46089a2342163232a52ae7cd45b0d554"

  78.         }

  79.       ]

  80.     },

  81.     {

  82.       "id": "bridge-pump-substitute",

  83.       "version": "3",

  84.       "code": "TASK-VIRTUAL-006",

  85.       "title": "重型支援桥液压泵应急替代",

  86.       "steps": [

  87.         {

  88.           "stepCode": "BRIDGE-STEP-1",

  89.           "number": 1,

  90.           "expectedTitle": "保持架桥车运行并断开取力器",

  91.           "expectedInstruction": "保持架桥车发动机运转，确保架桥车取力器处于断开状态。",

  92.           "text": "第1步，保持架桥车运行并断开取力器。保持架桥车发动机运转，确保架桥车取力器处于断开状态。",

  93.           "url": "/legacy/virtual-training/narration-revisions/junhao-v2-20260921/TASK-VIRTUAL-006-step-01.mp4",

  94.           "duration": 9.4,

  95.           "sha256": "78c4ac8fddbcd7794afc921edc68c8109222200783d205631056b070b5715ff6"

  96.         },

  97.         {

  98.           "stepCode": "BRIDGE-STEP-2",

  99.           "number": 2,

  100.           "expectedTitle": "连接两车液压软管",

  101.           "expectedInstruction": "连接支援车与架桥车液压软管。架桥车快接接头位于液压油箱右侧；支援车快接接头位于驾驶室外右下方。",

  102.           "text": "第2步，连接两车液压软管。连接支援车与架桥车液压软管。架桥车快接接头位于液压油箱右侧；支援车快接接头位于驾驶室外右下方。",

  103.           "url": "/legacy/virtual-training/narration-revisions/junhao-v2-20260921/TASK-VIRTUAL-006-step-02.mp4",

  104.           "duration": 13.72,

  105.           "sha256": "5556bc1752237995a103f28a83b05f87093eba7dfcadbc948d185ba4392edc96"

  106.         },

  107.         {

  108.           "stepCode": "BRIDGE-STEP-3",

  109.           "number": 3,

  110.           "expectedTitle": "打开支援车回油截止阀",

  111.           "expectedInstruction": "打开支援车液压油箱快接接头处的回油截止阀。",

  112.           "text": "第3步，打开支援车回油截止阀。打开支援车液压油箱快接接头处的回油截止阀。",

  113.           "url": "/legacy/virtual-training/narration-revisions/junhao-v2-20260921/TASK-VIRTUAL-006-step-03.mp4",

  114.           "duration": 7.36,

  115.           "sha256": "95d4fb73d116fbe97fe4d0563bb2540a7031760c11829f7a7c4d095fa100e73d"

  116.         },

  117.         {

  118.           "stepCode": "BRIDGE-STEP-4",

  119.           "number": 4,

  120.           "expectedTitle": "打开互救作业开关",

  121.           "expectedInstruction": "打开辅助控制盒上的“互救作业”开关。",

  122.           "text": "第4步，打开互救作业开关。打开辅助控制盒上的“互救作业”开关。",

  123.           "url": "/legacy/virtual-training/narration-revisions/junhao-v2-20260921/TASK-VIRTUAL-006-step-04.mp4",

  124.           "duration": 5.72,

  125.           "sha256": "2d64dabab5230a4e1436bb2e4b3d0d474b1e6e10fb2873ec003c4f047f84526b"

  126.         },

  127.         {

  128.           "stepCode": "BRIDGE-STEP-5",

  129.           "number": 5,

  130.           "expectedTitle": "打开滤油器出口连通球阀",

  131.           "expectedInstruction": "打开两个输油滤油器出口处的连通球阀。",

  132.           "text": "第5步，打开滤油器出口连通球阀。打开两个输油滤油器出口处的连通球阀。",

  133.           "url": "/legacy/virtual-training/narration-revisions/junhao-v2-20260921/TASK-VIRTUAL-006-step-05.mp4",

  134.           "duration": 8.36,

  135.           "sha256": "0a240839c426cfca2dc4334e773588e428eaea27e31714f7e021215505486134"

  136.         },

  137.         {

  138.           "stepCode": "BRIDGE-STEP-6",

  139.           "number": 6,

  140.           "expectedTitle": "接通支援车液压取力器",

  141.           "expectedInstruction": "接通支援车液压系统取力器，向架桥车供油。",

  142.           "text": "第6步，接通支援车液压取力器。接通支援车液压系统取力器，向架桥车供油。",

  143.           "url": "/legacy/virtual-training/narration-revisions/junhao-v2-20260921/TASK-VIRTUAL-006-step-06.mp4",

  144.           "duration": 6.84,

  145.           "sha256": "98cc5e425b5918000079be140ddedf02d16b4c7dca8871a276beb4f65259da8d"

  146.         },

  147.         {

  148.           "stepCode": "BRIDGE-STEP-7",

  149.           "number": 7,

  150.           "expectedTitle": "按正常步骤操作架桥车",

  151.           "expectedInstruction": "原图只概括“按正常操作步骤操作架桥车”，没有展开后续作业。",

  152.           "text": "第七步，按照正常操作步骤，操作架桥车。",

  153.           "url": "/legacy/virtual-training/narration-revisions/junhao-v2-20260921/TASK-VIRTUAL-006-step-07.mp4",

  154.           "duration": 4.4,

  155.           "sha256": "0cc7e428a1b746de54ccd9d6706a46a3c1d447be7a2a99752d8ca8cc4282e77a"

  156.         }

  157.       ]

  158.     },

  159.     {

  160.       "id": "bridge-pump-replace",

  161.       "version": "3",

  162.       "code": "TASK-VIRTUAL-007",

  163.       "title": "重型支援桥前泵换件修复",

  164.       "steps": [

  165.         {

  166.           "stepCode": "BRIDGE-STEP-1",

  167.           "number": 1,

  168.           "expectedTitle": "停机并初裁牛皮纸",

  169.           "expectedInstruction": "架桥车熄火；按液压泵与取力器结合面形状初步裁剪牛皮纸。",

  170.           "text": "第1步，停机并初裁牛皮纸。架桥车熄火；按液压泵与取力器结合面形状初步裁剪牛皮纸。",

  171.           "url": "/legacy/virtual-training/narration-revisions/junhao-v2-20260921/TASK-VIRTUAL-007-step-01.mp4",

  172.           "duration": 8.68,

  173.           "sha256": "10a3f3b0c78c0aedee94d17a118c4e0ed46b7b4d94dc258e1f95acbcb7bc9289"

  174.         },

  175.         {

  176.           "stepCode": "BRIDGE-STEP-2",

  177.           "number": 2,

  178.           "expectedTitle": "关闭液压油箱出油口一号球阀",

  179.           "expectedInstruction": "将一号球阀手柄从平行管道转到垂直管道。",

  180.           "text": "第2步，关闭液压油箱出油口一号球阀。将一号球阀手柄从平行管道转到垂直管道。",

  181.           "url": "/legacy/virtual-training/narration-revisions/junhao-v2-20260921/TASK-VIRTUAL-007-step-02.mp4",

  182.           "duration": 8.88,

  183.           "sha256": "4c6f16027800fdb1a352cbf056b5c2c8a372b664245704dc5106828f51ce744e"

  184.         },

  185.         {

  186.           "stepCode": "BRIDGE-STEP-3",

  187.           "number": 3,

  188.           "expectedTitle": "拆开并包扎进出油管",

  189.           "expectedInstruction": "用大活动扳手拆开液压泵进、出油管接头，用塑料袋包扎管口。",

  190.           "text": "第3步，拆开并包扎进出油管。用大活动扳手拆开液压泵进、出油管接头，用塑料袋包扎管口。",

  191.           "url": "/legacy/virtual-training/narration-revisions/junhao-v2-20260921/TASK-VIRTUAL-007-step-03.mp4",

  192.           "duration": 8.56,

  193.           "sha256": "9af81f3791114af9f50860b88333888bdfa7b996c8182a45a931df82e959114f"

  194.         },

  195.         {

  196.           "stepCode": "BRIDGE-STEP-4",

  197.           "number": 4,

  198.           "expectedTitle": "拆下四个安装螺栓",

  199.           "expectedInstruction": "用开口扳手拆下液压泵与取力器之间的四个安装螺栓。",

  200.           "text": "第4步，拆下四个安装螺栓。用开口扳手拆下液压泵与取力器之间的四个安装螺栓。",

  201.           "url": "/legacy/virtual-training/narration-revisions/junhao-v2-20260921/TASK-VIRTUAL-007-step-04.mp4",

  202.           "duration": 6.96,

  203.           "sha256": "39716062e06b70f6d52f9a4eb87a80c91e72a321e5ebd48c1b8113dd3380f5e6"

  204.         },

  205.         {

  206.           "stepCode": "BRIDGE-STEP-5",

  207.           "number": 5,

  208.           "expectedTitle": "取下旧前泵",

  209.           "expectedInstruction": "取下原前泵。",

  210.           "text": "第五步，取下发生故障的前部液压泵。",

  211.           "url": "/legacy/virtual-training/narration-revisions/junhao-v2-20260921/TASK-VIRTUAL-007-step-05.mp4",

  212.           "duration": 4.4,

  213.           "sha256": "ef530aed60e20d356e291bfb39925ff4ec8c4ed3d3be4acc681e7905cf90ee36"

  214.         },

  215.         {

  216.           "stepCode": "BRIDGE-STEP-6",

  217.           "number": 6,

  218.           "expectedTitle": "修裁牛皮纸",

  219.           "expectedInstruction": "进一步裁剪牛皮纸，使其与液压泵安装面及取力器结合面吻合。",

  220.           "text": "第6步，修裁牛皮纸。进一步裁剪牛皮纸，使其与液压泵安装面及取力器结合面吻合。",

  221.           "url": "/legacy/virtual-training/narration-revisions/junhao-v2-20260921/TASK-VIRTUAL-007-step-06.mp4",

  222.           "duration": 9.4,

  223.           "sha256": "d53f2bef5b0e5547c680fe98e3d7aa020fabf5242628f903430165e65ae872d0"

  224.         },

  225.         {

  226.           "stepCode": "BRIDGE-STEP-7",

  227.           "number": 7,

  228.           "expectedTitle": "放置牛皮纸垫",

  229.           "expectedInstruction": "将裁好的牛皮纸放在取力器接口处。",

  230.           "text": "第7步，放置牛皮纸垫。将裁好的牛皮纸放在取力器接口处。",

  231.           "url": "/legacy/virtual-training/narration-revisions/junhao-v2-20260921/TASK-VIRTUAL-007-step-07.mp4",

  232.           "duration": 6.16,

  233.           "sha256": "e8225937c25fb6a0978c0803ceb4efaa0947f08e48ccfa5be86f0f056943be5e"

  234.         },

  235.         {

  236.           "stepCode": "BRIDGE-STEP-8",

  237.           "number": 8,

  238.           "expectedTitle": "安装新液压泵",

  239.           "expectedInstruction": "安装新的液压泵。原稿没有给出拧紧力矩。",

  240.           "text": "第8步，安装新液压泵。安装新的液压泵。",

  241.           "url": "/legacy/virtual-training/narration-revisions/junhao-v2-20260921/TASK-VIRTUAL-007-step-08.mp4",

  242.           "duration": 4.4,

  243.           "sha256": "235398c28f7558352a80bc0aa2dd2678bf01b0910e1fe8a80ced21cd97c424d4"

  244.         },

  245.         {

  246.           "stepCode": "BRIDGE-STEP-9",

  247.           "number": 9,

  248.           "expectedTitle": "向新泵加注液压油",

  249.           "expectedInstruction": "打开新液压泵加油口，加注液压油。原稿没有给出定量值。",

  250.           "text": "第9步，向新泵加注液压油。打开新液压泵加油口，加注液压油。",

  251.           "url": "/legacy/virtual-training/narration-revisions/junhao-v2-20260921/TASK-VIRTUAL-007-step-09.mp4",

  252.           "duration": 6.88,

  253.           "sha256": "7e2ed8add709aa1f5957e8c12cf905d918b021253197e5baf6fbd21519c7534d"

  254.         },

  255.         {

  256.           "stepCode": "BRIDGE-STEP-10",

  257.           "number": 10,

  258.           "expectedTitle": "恢复进出油管连接",

  259.           "expectedInstruction": "用大活动扳手连接并拧紧液压泵进、出油管。",

  260.           "text": "第10步，恢复进出油管连接。用大活动扳手连接并拧紧液压泵进、出油管。",

  261.           "url": "/legacy/virtual-training/narration-revisions/junhao-v2-20260921/TASK-VIRTUAL-007-step-10.mp4",

  262.           "duration": 7.32,

  263.           "sha256": "cea220f1b0094547a1033392b38bf44fe80827a3ea692a5642fb3e7d30c93d55"

  264.         },

  265.         {

  266.           "stepCode": "BRIDGE-STEP-11",

  267.           "number": 11,

  268.           "expectedTitle": "启动设备试验",

  269.           "expectedInstruction": "启动设备进行试验。原稿没有展开具体试验项目和判定数值。",

  270.           "text": "第11步，启动设备试验。启动设备进行试验。",

  271.           "url": "/legacy/virtual-training/narration-revisions/junhao-v2-20260921/TASK-VIRTUAL-007-step-11.mp4",

  272.           "duration": 4.24,

  273.           "sha256": "857a911869eb44198b025a838c1e7986b167893b9d1a0f517f7729b1181750e0"

  274.         }

  275.       ]

  276.     },

  277.     {

  278.       "id": "bridge-balance-valve-swap",

  279.       "version": "3",

  280.       "code": "TASK-VIRTUAL-008",

  281.       "title": "重型支援桥平衡阀拆拼互换",

  282.       "steps": [

  283.         {

  284.           "stepCode": "BRIDGE-STEP-1",

  285.           "number": 1,

  286.           "expectedTitle": "清洗小腔平衡阀",

  287.           "expectedInstruction": "用清洗剂清洗平衡阀和管接头，并用抹布擦净。",

  288.           "text": "第1步，清洗小腔平衡阀。用清洗剂清洗平衡阀和管接头，并用抹布擦净。",

  289.           "url": "/legacy/virtual-training/narration-revisions/junhao-v2-20260921/TASK-VIRTUAL-008-step-01.mp4",

  290.           "duration": 7.48,

  291.           "sha256": "e70419c63a0d8936621e118785461158a1e639d57bbad60f852c332050c96ba1"

  292.         },

  293.         {

  294.           "stepCode": "BRIDGE-STEP-2",

  295.           "number": 2,

  296.           "expectedTitle": "拆开小腔控制油口管路",

  297.           "expectedInstruction": "用19开口扳手拆开控制油口管路，用塑料袋包扎管口。",

  298.           "text": "第2步，拆开小腔控制油口管路。用十九号开口扳手拆开控制油口管路，用塑料袋包扎管口。",

  299.           "url": "/legacy/virtual-training/narration-revisions/junhao-v2-20260921/TASK-VIRTUAL-008-step-02.mp4",

  300.           "duration": 10.0,

  301.           "sha256": "f7ef97db523bca45e659d5f2540775e1d3db90dab4273f65c142622fafec1cb0"

  302.         },

  303.         {

  304.           "stepCode": "BRIDGE-STEP-3",

  305.           "number": 3,

  306.           "expectedTitle": "拆下小腔平衡阀",

  307.           "expectedInstruction": "用8内六角扳手拆下安装螺栓，取下平衡阀。",

  308.           "text": "第3步，拆下小腔平衡阀。用八号内六角扳手拆下安装螺栓，取下平衡阀。",

  309.           "url": "/legacy/virtual-training/narration-revisions/junhao-v2-20260921/TASK-VIRTUAL-008-step-03.mp4",

  310.           "duration": 7.4,

  311.           "sha256": "ee544089145d42e6c8b043155215c256070bac2f2ba3b6f8af427d733fc17a63"

  312.         },

  313.         {

  314.           "stepCode": "BRIDGE-STEP-4",

  315.           "number": 4,

  316.           "expectedTitle": "封堵小腔油口",

  317.           "expectedInstruction": "用两个油堵封住两个油口，擦净阀座结合面。",

  318.           "text": "第4步，封堵小腔油口。用两个油堵封住两个油口，擦净阀座结合面。",

  319.           "url": "/legacy/virtual-training/narration-revisions/junhao-v2-20260921/TASK-VIRTUAL-008-step-04.mp4",

  320.           "duration": 6.88,

  321.           "sha256": "f0e42b0e196bafc976f958aafe3d61bc7470f3f7223e551df7998c02263c8284"

  322.         },

  323.         {

  324.           "stepCode": "BRIDGE-STEP-5",

  325.           "number": 5,

  326.           "expectedTitle": "清洗大腔平衡阀",

  327.           "expectedInstruction": "用清洗剂清洗平衡阀和管接头，并用抹布擦净。",

  328.           "text": "第5步，清洗大腔平衡阀。用清洗剂清洗平衡阀和管接头，并用抹布擦净。",

  329.           "url": "/legacy/virtual-training/narration-revisions/junhao-v2-20260921/TASK-VIRTUAL-008-step-05.mp4",

  330.           "duration": 7.36,

  331.           "sha256": "6c70b944776a7cb128ef570008e18c4d7ada24ab9e1141d374a5ac46306f4da5"

  332.         },

  333.         {

  334.           "stepCode": "BRIDGE-STEP-6",

  335.           "number": 6,

  336.           "expectedTitle": "拆开大腔控制油口管路",

  337.           "expectedInstruction": "用19开口扳手拆开控制油口管路，用塑料袋包扎管口。",

  338.           "text": "第6步，拆开大腔控制油口管路。用十九号开口扳手拆开控制油口管路，用塑料袋包扎管口。",

  339.           "url": "/legacy/virtual-training/narration-revisions/junhao-v2-20260921/TASK-VIRTUAL-008-step-06.mp4",

  340.           "duration": 8.16,

  341.           "sha256": "41b5097bcdb8298e1daf62f2b3abe476977dca125b3ebf301a177fe1a95b916a"

  342.         },

  343.         {

  344.           "stepCode": "BRIDGE-STEP-7",

  345.           "number": 7,

  346.           "expectedTitle": "拆下大腔平衡阀",

  347.           "expectedInstruction": "用8内六角扳手拆下安装螺栓，取下平衡阀。",

  348.           "text": "第7步，拆下大腔平衡阀。用八号内六角扳手拆下安装螺栓，取下平衡阀。",

  349.           "url": "/legacy/virtual-training/narration-revisions/junhao-v2-20260921/TASK-VIRTUAL-008-step-07.mp4",

  350.           "duration": 7.72,

  351.           "sha256": "19ddbaa145fbceda54807d7def679351dff77ece26e860920f54e59ecc9e67f5"

  352.         },

  353.         {

  354.           "stepCode": "BRIDGE-STEP-8",

  355.           "number": 8,

  356.           "expectedTitle": "封堵大腔油口",

  357.           "expectedInstruction": "用两个油堵封住两个油口，擦净阀座结合面。",

  358.           "text": "第八步，用两个油堵封住大腔的两个油口，并擦净阀座结合面。",

  359.           "url": "/legacy/virtual-training/narration-revisions/junhao-v2-20260921/TASK-VIRTUAL-008-step-08.mp4",

  360.           "duration": 6.16,

  361.           "sha256": "f2ea5d6f09c08b5a28b0e22cfb9de1227bc72823b75dc99496be0e870baa9ab3"

  362.         },

  363.         {

  364.           "stepCode": "BRIDGE-STEP-9",

  365.           "number": 9,

  366.           "expectedTitle": "准备安装大腔平衡阀",

  367.           "expectedInstruction": "擦净平衡阀及阀座结合面，取下两个油堵。",

  368.           "text": "第九步，准备安装大腔平衡阀。擦净平衡阀及阀座结合面，然后取下两个油堵。",

  369.           "url": "/legacy/virtual-training/narration-revisions/junhao-v2-20260921/TASK-VIRTUAL-008-step-09.mp4",

  370.           "duration": 8.44,

  371.           "sha256": "c35b2d862896ca508d6991badabfb2a331c515b351d282d75174a3a76eeabb0c"

  372.         },

  373.         {

  374.           "stepCode": "BRIDGE-STEP-10",

  375.           "number": 10,

  376.           "expectedTitle": "安装大腔平衡阀",

  377.           "expectedInstruction": "将平衡阀放置于阀座上，用8内六角扳手安装四个安装螺栓。",

  378.           "text": "第10步，安装大腔平衡阀。将平衡阀放置于阀座上，用八号内六角扳手安装四个安装螺栓。",

  379.           "url": "/legacy/virtual-training/narration-revisions/junhao-v2-20260921/TASK-VIRTUAL-008-step-10.mp4",

  380.           "duration": 9.04,

  381.           "sha256": "b81832388ff8e000570d1ed4b8c9eebe83fe7f7890864802efcc924d3dbbedc7"

  382.         },

  383.         {

  384.           "stepCode": "BRIDGE-STEP-11",

  385.           "number": 11,

  386.           "expectedTitle": "核对大腔控制油口管路连接",

  387.           "expectedInstruction": "原稿先写“拆下包扎袋，连接并拧紧管路”，随后又出现“用19开口扳手拆开管路并包扎”的相反描述。",

  388.           "text": "第11步，核对大腔控制油口管路连接。核对大腔控制油口管路连接，记录处理方式及依据，并提交教员核对。",

  389.           "url": "/legacy/virtual-training/narration-revisions/junhao-v2-20260921/TASK-VIRTUAL-008-step-11.mp4",

  390.           "duration": 10.6,

  391.           "sha256": "f29c0bab1481152f39d44f68dca5a3f87178d5047b238b83cd936c6a62e9b4ce"

  392.         },

  393.         {

  394.           "stepCode": "BRIDGE-STEP-12",

  395.           "number": 12,

  396.           "expectedTitle": "紧固大腔阀体连接螺栓",

  397.           "expectedInstruction": "用内六角扳手拧紧四个阀体连接螺栓。",

  398.           "text": "第12步，紧固大腔阀体连接螺栓。用内六角扳手拧紧四个阀体连接螺栓。",

  399.           "url": "/legacy/virtual-training/narration-revisions/junhao-v2-20260921/TASK-VIRTUAL-008-step-12.mp4",

  400.           "duration": 7.36,

  401.           "sha256": "20d103a2bf73ac67f624011dd136ef68c3ba62bc644df16d9f779e13d2dbfdb8"

  402.         },

  403.         {

  404.           "stepCode": "BRIDGE-STEP-13",

  405.           "number": 13,

  406.           "expectedTitle": "准备安装小腔平衡阀",

  407.           "expectedInstruction": "擦净平衡阀及阀座结合面，取下两个油堵。",

  408.           "text": "第13步，准备安装小腔平衡阀。擦净平衡阀及阀座结合面，取下两个油堵。",

  409.           "url": "/legacy/virtual-training/narration-revisions/junhao-v2-20260921/TASK-VIRTUAL-008-step-13.mp4",

  410.           "duration": 7.0,

  411.           "sha256": "c4ea5cc4916f7ffd6f3a3a6ca3145c669c2d30998f9cbd300e1615ee9cc46e47"

  412.         },

  413.         {

  414.           "stepCode": "BRIDGE-STEP-14",

  415.           "number": 14,

  416.           "expectedTitle": "安装小腔平衡阀",

  417.           "expectedInstruction": "将平衡阀放置于阀座上，用8内六角扳手安装四个安装螺栓。",

  418.           "text": "第14步，安装小腔平衡阀。将平衡阀放置于阀座上，用八号内六角扳手安装四个安装螺栓。",

  419.           "url": "/legacy/virtual-training/narration-revisions/junhao-v2-20260921/TASK-VIRTUAL-008-step-14.mp4",

  420.           "duration": 10.2,

  421.           "sha256": "c12449d3d7ea0400f2771bfac8ef4a39b4fb74ad20573864052e2a6c92770289"

  422.         },

  423.         {

  424.           "stepCode": "BRIDGE-STEP-15",

  425.           "number": 15,

  426.           "expectedTitle": "核对小腔控制油口管路连接",

  427.           "expectedInstruction": "原稿先写“拆下包扎袋，连接并拧紧管路”，随后又出现“用19开口扳手拆开管路并包扎”的相反描述。",

  428.           "text": "第15步，核对小腔控制油口管路连接。核对小腔控制油口管路连接，记录处理方式及依据，并提交教员核对。",

  429.           "url": "/legacy/virtual-training/narration-revisions/junhao-v2-20260921/TASK-VIRTUAL-008-step-15.mp4",

  430.           "duration": 9.92,

  431.           "sha256": "b3eca4435a6def03796cac3d942c937113df8a187aad4c03b90dd74ff2320098"

  432.         },

  433.         {

  434.           "stepCode": "BRIDGE-STEP-16",

  435.           "number": 16,

  436.           "expectedTitle": "紧固小腔阀体连接螺栓",

  437.           "expectedInstruction": "用内六角扳手拧紧四个阀体连接螺栓。",

  438.           "text": "第16步，紧固小腔阀体连接螺栓。用内六角扳手拧紧四个阀体连接螺栓。",

  439.           "url": "/legacy/virtual-training/narration-revisions/junhao-v2-20260921/TASK-VIRTUAL-008-step-16.mp4",

  440.           "duration": 8.12,

  441.           "sha256": "358eb10b0db772f883e87a4d468620c0c050f0441e20e9a59142ee2ce08d3437"

  442.         }

  443.       ]

  444.     }

  445.   ]

  446. }